PlayStation®2 30000 - 50000 Series / Installation
Installing Using an S VIDEO Cable
To install your PlayStation®2 computer entertainment system using an S VIDEO cable:
- Connect the cables
Connect the flat end of the S VIDEO cable to the AV MULTI OUT connector on the back of the PlayStation®2.
Connect the other end of the cable to the S VIDEO input on the back of your TV: the black plug goes into the port marked S VIDEO IN and the white and red plugs go into the ports marked AUDIO IN.
Connect the AC power cord into the PlayStation®2 system and plug it into a working electrical outlet.
- Start the system
Turn on your PlayStation®2 by pressing the MAIN POWER switch on the back of the system.
Press the standby/RESET button on the front of the system. Make sure the indicator light turns green.
Press the open button, place a PlayStation®2 disc in the tray, and press the open button again to close the tray.
- Set up the TV
Turn on your TV.
Press the TV/Video button on your TV�s remote control. The TV/Video button might also be called the Input, AUX, or Line button on your remote Use the setting you would if you were going to watch a movie.
NOTE: You might need to set your TV or VCR to channel 00, 90, 91, or 92.